Compressed Air Blow Off Spray Headers

9 Data Points Required to Obtain a No-Obligation Proposal

All you need to do is fill in as much of the following information as possible and then Email it to us.  We'll have a quotation with proposal drawing on it's way to you within a day or two.

Please fill out the three sections below and then press the submit button.

CONTACT INFORMATION

Name:
Company Name:
Address:
City, State, Zip:
E-mail:
Tel:
FAX:
DATA REQUIRED
STEPDATADATA DESCRIPTION (REFER TO PICTURE ABOVE)
1"B" Dimension = Width of spray coverage area desired
2"G" Dimension = Spray height (4-6" recommended)
3"L" Dimension = Overall length of WAK header
4"M" Dimension = I.D. of Mill or Approximate distance between WAK header supports
5Type of header design desired (chevron, straight, cluster, etc...)
6Compressed Air Capacity Available
7Compressed Air Pressure Available for the Capacity Listed Above
8Diameter of the compressed air feed piping
9304 SS
316 SS
Other		Material of construction required (check one - NOTE: 304SS is standard)
Describe other materials of construction or application notes below
Additional Comments or Instructions
Please select how you found our webpage
(If you found us via a link or "other" please describe )

When you are ready to send the form, press the "Submit" button