Sonic Air Systems Air Knife Drying System Inquiry Form

Please fill-out this four section form.  Section 1. needs to be filled in completely.  The other sections should be filled in as much as possible/applicable. When completed, just send it to us by hitting the submit button at the end of the page.

You can also open the PDF version, print it and then fax the completed form to our office at 1-(908) 496-8080

Section 1.   Company Information
Company:
Contact:
Title:
Street:
City: State: Zip: Country
Phone: Extension:
Fax:
Email:
Section 2.   Part Specifications
Describe the part to be dried:
What are the dimensions of the part?L:W:H:Dia:WT
What is the material of construction?Plastic  Glass  Metal  Elastomer
Other
Describe the surface condition:SmoothTexturedPorousOther
Describe the surface contour:Tru HolesBlind Holes Pockets Crevices
RibbedProtrusionsOther
Upon request, can a sample be provided for tests in our lab? Yes
Section 3.  Method of Conveyance
How is Part Conveyed?ConveyorOther:
Conveyor Speed:Conveyor Width:
Conveyor Type:BeltOverheadHoistCable
Conveyor Material:Mesh Open Area %Roller: Diameter: Pitch:
What is your production rate?parts/ft per:MinuteHourDayBatch
Batch Size:
Batches/hr:
How is the part oriented on the conveyor?
What is the direction of travel?HorizontalVerticalOther
Does the part rotate?YesRPMNo
How close can an air knife be placed to the product?
Are there any space limitations for an SAS system?Yes No
Describe:
Section 4.  Performance Parameters
Material to be removed from part?Tap WaterDI WaterCoolants/Lubricants
Wash SolutionAcids/CausticsCoatings

Contaminants

Other
Temperature% Solution
What level of air filtration is required to maintain product cleanliness?
Standard 10 micronsClean Room 0.3 microns
What method do you use to determine the dryness of the part?
NoneVisualGross WeightOptical ScannerOther:
What level of dryness is required?50%90%95%99%Other: %
What sections of the part need drying?TopLeft SideRight SideFront
BackBottomAll SurfacesOther
Describe the electrical power available:
Special Motor Considerations? Yes
Premium EfficiencyExplosion ProofWash DownOther
Is this a wash down area?YesCaustic  Water only
Other
Plant Conditions:Temp: Altitude:
Will blower be exposed to water spray?Yes
Dirt and Debris?Yes
Is noise a consideration?Yes
Acceptable decibel level:

Please Check Over Your Inquiry and Press the Submit Button Below

 

T.P.S., Inc.  Columbia NJ 07860
Phone: 908.496.9020 Fax: 908.496.8080 inquiry@fluidproducts.com
? INQUIRIES - Quick-n-Easy to fill out forms to get the information you need fast.

©2001-2008 T.P.S., Inc. Legal Information