STAMM Linear Oscillators for Shower Headers

10.200 E   This robust and reliable oscillator features an electromechanical crank drive where the rotary action of a worm-geared motor is transformed into an oscillating movement by a sliding block and axial guide rail.  The drive motor is flanged onto the side of the oscillator housing and is almost totally enclosed. Sinusoidal movement does not allow for speed adjustment.

• Available for showers 2” – 6” diameter

• Stroke:  7.88” (200mm), not adjustable

• Speed varies over the total stroke length

• Compact size

• Low maintenance

10.591 S   This oil-hydraulic oscillator, with tilting and

swiveling joint, provides smooth linear  movement with

instantaneous reversal at the end positions that is

suitable for controlled cleaning at very slow speeds.  A

micro-flow control valve provides infinitely adjustable

stroke speed and linear movement.

• Available for showers 2” – 6” diameter
• Stroke:  0”-11.82” (1-300mm), infinitely adjustable
• Range of speed: 0.8 –15.75 in/min (20 to 400 mm/min)
• Compact size
• Low maintenance

10.170 S   This pneumatic oscillator includes a tilting and

swiveling joint and a compressed air maintenance unit.

The unit features instantaneous reversal at the end

positions accomplished by the use of a double acting

pneumatic cylinder and a directly operated pneumatic

switchover valve eliminating “zero speed” delay.  The

10.170 S features infinitely adjustable stroke speed and

linear movement. 

• Available for showers 2” – 3” diameter

• Stroke:  1.97”-11.82” (50-300mm), infinitely adjustable
• Constant speed over the stroke length
• Preventative maintenance recommended
• Optional safety switch-off unit available

10.510 LSE –R  This electromechanical oscillator provides oscillation by the transformation of the rotary movement of a threaded ball spindle into a uniform stroke movement.  Its instantaneous reversing action at the switchover points eliminate standstill and prevent uneven wear.  User can choose constant or infinitely variable speed. 

• Available for showers 2” – 6” diameter

• Stroke:  8” or 12” (200 or 300mm), not adjustable
• Rapid exchange of the linear unit for ease of maintenance.
• Preventative maintenance recommended
• Optional safety switch-off unit available

10.691 S   This oil-hydraulic oscillator, incorporates an

electronic oil flow-control valve for automatic adjustment of

the stroke speed in synchronicity with the paper machine. 

Computer controls provide infinitely adjustable stroke and

speed, staggering reverse points, and fast return option.

• Available for showers 2” – 6” diameter
• Stroke:  0”-11.82” (1-300mm), infinitely adjustable
• Automatic adjustment of speed: 0 –15.75 in/min (1 to 400 mm/min)
• Compact size
• Low maintenance

10.510 EC   This electromechanical oscillator provides

synchronized, controlled cleaning of wires, felts, and

rolls.  Computer controls allow automatic adjustment of

the stroke speed to the paper machine speed. Stroke

length, reverse point staggering, and fast return are

controlled and monitored with simple programming via a

supplied control panel. 

• Available for showers 2” – 6” diameter

• Stroke:  0”-11.82” (1-300mm), infinitely adjustable

• Range of speed: 0 –15.75 in/min (1 to 400mm/min)

• Compact size

• Minimum energy consumption