---

Sealless Positive Displacement Pumps

What do you call a pump that can reliably pump abrasive, hot, viscous or corrosive fluids? A good all around heavy-duty industrial pump that will provide a consistent, smooth flow of even the most difficult to pump fluids? What would you call a pump that doesn’t have any cups, packing or mechanical seals - a pump that can be run dry? Some have called it ingenious and the best thing since sliced bread - we call it ... The Hydra-Cell Pump !

For more than 25 years Wanner Engineering has been manufacturing a truly unique and one-of-a-kind industrial pump - The Hydra-Cell™.  What started off as building a better mousetrap (or positive displacement pump in this case!) has lead to fundamental innovations in the positive displacement pump industry.  For example, the low-mass high-speed check valve design that has become a standard in most positive displacement pumps today is accredited to inventor Bill Wanner Sr. and his Hydra-Cell™ Pump.

The Wanner Engineering Hydra-Cell™ Pump is a unique, sealless, positive displacement pump for demanding industrial applications.  It was designed, in-part, as an alternative to pumps that have cups, packing and mechanical seals - which are the most troublesome parts of most positive displacement pumps. 

Hydra-Cell's™ are available in both horizontal and vertical configurations and are used to provide flow rates from 0.1 to 38 GPM at pressures from 50 to 2500 PSI.

The unique design of the Hydra-Cell™ Pump is not dependent on the fluid being pumped for internal lubrication. In-fact, all the bearings and moving parts are isolated from the fluid being pumped. This is why we can reliably pump chemicals, abrasives, slurries, viscous products, seawater, re-circulated water and many other fluids, either hot or cold. Our pumps are available with both metallic and non-metallic pump ends and can be direct driven with electric, pneumatic or hydraulic motors.

How Do They Work?

Key Benefits

• They're Sealless!   There are no cups, packing or mechanical seals in Hydra-Cell™ Pumps.  All the sliding and rotating parts are isolated from the pumped fluid.  This enables you to pump solids laden (dirty) fluids, very hot or cold fluids and also lets you run the pump dry!  Your piston, plunger, gear and progressing cavity pumps will not hold-up to tough fluids as well as Hydra-Cell's™.
• Reliability.   Hydra-Cell's™ have up to 30% fewer parts than other common industrial pumps.   Less parts equates to less maintenance and downtime - which can be very costly.   If you're having mechanical seal problems or replacing stators and rotors on a regular basis you ought to really consider switching to Hydra-Cell™ Pumps.
• Smooth, Consistent Flow.   Since Hydra-Cell's™ are positive displacement pumps, each rotation displaces a fixed amount of fluid.  Our pumps are often used in conjunction with variable speed motor controls as metering pumps - reliably dosing or transferring fixed amounts of fluid in a process.  Unlike piston pumps and other reciprocating pumps, Hydra-Cell's™ provide a smooth, virtually pulsation-free flow rate.  With the exception of certain membrane and plastic piping applications, pulsation dampeners are not required.

View pumps for a specific flow range/pressure range by choosing from the below:

	Pump Model	Maximum Flow	Maximum Pressure	Typical Applications
	F20 Series	1 GPM	1500 PSI	Precise metering and injection
	D03 Series	3 GPM	1200 PSI	Precise metering and spraying
	D04 Series	3 GPM	2500 PSI	Hot water pressure washing, machine tool coolant
	D10 Series	8 GPM	1000 PSI	Metering, washing, transfer, our most versatile pump
	D12 Series	8 GPM	1000 PSI	Machine tool coolant, the "vertical version of the D10"
	D15/17 Series	13 GPM	2500 PSI	Machine tool coolant, inlet fogging, hot water pressure washing, descaling
	H25 Series	20 GPM	1000 PSI	Lime slurry, spray drying, wax and resin pumping, chemical transfer
	D35 Series	35 GPM	1200 PSI	Abrasive slurry pumping, in-plant cleaning systems, vehicle washing, paper mill applications, gas cooling

Highlights of common applications can be read by clicking phrases below:

Machine Tool Coolant	SOx & NOx Reduction Gas Cooling	Spray Drying	Food & Beverage Industry
Vehicle Care Industry	Precision Metering	Pulp and Paper Industry	Chemical Manufacturing

• Click Here to send us your pump inquiry, we'll respond within 24 hours!

• Fill-out the Online Unigy Inquiry Form

	T.P.S., Inc.  Columbia NJ 07860
	Phone: 908.496.9020	Fax: 908.496.8080	inquiry@fluidproducts.com

©2001-2008 T.P.S., Inc. Legal Information