---

Hydra-Cell™ D04 and D15 Pumps ... You Think You've Got Pressure? The Wanner Engineering D04 Hydra-Cell™ Pump is a powerful positive displacement pump capable of flow rates from 0.10 to 3 GPM and the D15 of flows up to 13 GPM - both pumps are designed to provide pressures of 100 to 2,500 PSI.

These special high pressure pumps are used for metering, deep hole drilling, cleaning, deburring, machine tool coolant, fuel injector and spray nozzle testing, descaling and turbo compressor inlet fogging applications.  Although they look very similar to other Hydra-Cell™ pump models with similar flow rates, there are several enhancements to provide pressures over 1,000 PSI

• The crankshaft and connecting rods have larger lands and are harder and polished.
• D04's have a cast housing, which includes more material and strength.
• The diaphragm plate is machined from steel instead of aluminum.
• The diaphragms have a retaining lip on the front and rear side to withstand higher pressures.
• The manifold and valve plates are thicker for strength and their bolts are longer and heavier.
• The oil reservoir is larger to to reduce air entrainment.

Hydra-Cell™ Pumps are sealless positive displacement pumps capable of higher pressures (up to 2500 psi).  One of our best customers for these pumps is a manufacturer of pressure washing equipment used at construction sites and plants that have zero discharge policies.  The water and chemicals used for washing are reclaimed, and since our pumps doesn't have cups, packing and mechanical seals, they are more reliable and perform better.  Hydra-Cells also operate quieter and run smoother than pumps based on older technology.

By clicking on the following two thumbnail pictures you can view the catalog pages for the D04 or D15 Pumps.  Feel free to email us if you'd like us to mail you a copy.

PDF File of D04 Pump Catalog Page up to 3 GPM at 2,500 PSI	PDF File of D15 Pump Catalog Page up to 13 GPM at 2,500 PSI

Click here to view the various pump models available

Or view pumps for a specific flow range/pressure range by choosing from the below:

Highlights of common applications can be read by clicking phrases below:
(hovering your mouse over the pictures will describe the type of application)

	There are stocking pump distributors located in your area. They are familiar with industrial pump applications and can provide you with a variety of complete pump/motor packages to suit your specific requirements. Please contact our office for the name of the distributor nearest to you.

Return to the Hydra-Cell™ Page

	T.P.S., Inc.  Blairstown NJ 07825
	Phone: 908.362.9981	Fax: 908.362.5631	inquiry@fluidproducts.com

©2001-2012 T.P.S., Inc. Legal Information