Technical Products and Services Inc. Technical Products and Services Inc.
Your Single Source of Fluid Handling Products Since 1981

145 State Highway 94, Blairstown, NJ 07825  p.908.362.9981   fax.908.362.5631

 

SPECIALTY BULK STORAGE AND APPLICATOR TANKS

 

 

Specialty tanks are those that are custom made for both stationary and portable applications.  Below is a sample of existing tank designs.  If you require a variation of these or one of our other tanks, please fill out our Custom Tank Inquiry Form to receive additional information such as dimensional drawings and pricing.

 

All specialty storage and applicator tanks are manufactured from medium to high density polyethylene and are standard in translucent "natural" color to enable you to determine the fill level.  These specialty storage and applicator tanks are fabricated from an FDA compliant polyethylene material and are suitable for storage of potable water and both food and pharmaceutical ingredients. All vertical tanks are marked with gallon indicators and have a bulkhead fitting.

 

 

Rinse Tanks Flat Bottom Rectangle Tanks Applicator Tanks
(sump on bottom)
rinse tank side outletrinse tank bottom outletrinse tank, cone outlet small flat bottom tankmedium flat bottom tanklarge flat bottom tank applicator tank
Capacity
(gallons)
Dimensions
(W x L x H, in.)
Capacity
(gallons)
Dimensions
(W x L x H, in.)
Capacity
(gallons)
Dimensions
(W x L x H, in.)
2.5 7 x 15 x 14 Rectangle 5 10 x 22 x 8 6 12 x 16 x  17
3 7 x 12 x 14 Rectangle 6 12 x 15 x 8 9 14 x 18 x 12
3.5 11 x 15
cylinder
6 12 x 15 x 8 9 12 x 16 x 22
4 11 x 11 x 15 Square 7 9 x 14 x 15 15 12 x 16 x 28
4 11 x 11 x 14 Square 16 14 x 21 x 14 11 14 x 28 x 12
5 11 x 11 x 20 Square 20 11 x 15 x 31  
5 11 x 11 x 19 Square  
10 13 x 13 x 21 Square