| Model H25 Hydra-Cell™Pumps The Wanner Engineering H25 Hydra-Cell™ Pump is a powerful positive displacement pump capable of flow rates from 2 to 20 GPM at pressures from 50 to 1,000 PSI. These are very versatile pumps, used at their maximum flow range for high pressure water and machine tool coolant applications and at slower speeds for abrasive slurries, viscous fluids and precise injection applications. |
H25 Pumps are available with both metallic and non-metallic pump ends. As with all Hydra-Cell™ Pumps, the H25 can tolerate a closed inlet while running, pump fluids in excess of 200F, and run dry. It would be truly difficult to list all the applications that use this model pump. Chip board manufacturing plants such as Georgia Pacific use H25's for metering wax and resin in the manufacture of those products. We have supplied flanged versions to refineries, non-metallic versions for acid (membrane) filtration and most Tru-Green Chemlawn fertilizer trucks utilize 1 or 2 H25 Hydra-Cell™ Pumps. If you have a difficult to pump fluid or are currently using a pump such as a progressing cavity style that costs a lot to maintain each year, than this is a pump you should consider. We provide pump ends only or complete pump/motor skids with belt or direct drive and VFD if desired.
 |  |  |
| Non-Metallic Pump End | Flanged H25 | Belt Driven H25 Pump System |
view pumps for a specific flow range/pressure range by choosing from the below:
| Pump Model | Maximum Flow | Maximum Pressure | Typical Applications | |
 | F20 Series | 1 GPM | 1500 PSI | Precise metering and injection |
 | D03 Series | 3 GPM | 1200 PSI | Precise metering and spraying |
 | D04 Series | 3 GPM | 2500 PSI | Hot water pressure washing, machine tool coolant |
 | D10 Series | 8 GPM | 1000 PSI | Metering, washing, transfer, our most versatile pump |
 | D12 Series | 8 GPM | 1000 PSI | Machine tool coolant, the "vertical version of the D10" |
 | D15/17 Series | 13 GPM | 2500 PSI | Machine tool coolant, inlet fogging, hot water pressure washing, descaling |
 | D35 Series | 35 GPM | 1200 PSI | Abrasive slurry pumping, in-plant cleaning systems, vehicle washing, paper mill applications, gas cooling |
Highlights of common applications can be read by clicking phrases below:
 |  |  |  |
| Machine Tool Coolant | SOx & NOx Reduction Gas Cooling | Spray Drying | Food & Beverage Industry |
 |  |  |  |
| Vehicle Care Industry | Precision Metering | Pulp and Paper Industry | Chemical Manufacturing |
 |
T.P.S., Inc. Columbia NJ 07860 | ||
| Phone: 908.496.9020 | Fax: 908.496.8080 | inquiry@fluidproducts.com | |
| ? INQUIRIES - Quick-n-Easy to fill out forms to get the information you need fast. |
