 | Innovative Pentaplex Design The Wanner Engineering D35 Hydra-Cell™ Pump is a powerful positive displacement pump capable of precision flow rates from 3 to 35 GPM at discharge pressures from 50 to 1,200 PSI |  |
Model D35 Hydra-Cell™ Pumps
| Innovative Pentaplex Design The Wanner Engineering D35 Hydra-Cell™ Pump is a powerful positive displacement pump capable of precision flow rates from 3 to 35 GPM at discharge pressures from 50 to 1,200 PSI | |
D35 Pumps are currently Wanner Engineering's largest Hydra-Cell™ Pump. Used in such diverse applications as pumping lime slurry at incineration plants, centralized high pressure water system pumps in the food and beverage industry and aerosol can filling applications, there is no other pump like this one in the world. As with all Hydra-Cells™, the D35 can tolerate a closed inlet while running, pump fluids in excess of 200F, and run dry. These pumps are so efficient and reliable that several customers operate (2) D35's from a single motor to achieve 70 GPM at pressures up to 1,200 PSI.
 | When the US Navy needed a pump for its Sea Wolf Class Nuclear Submarine, for sea water RO to support onboard drinking and reactor cooling requirements, what pump do you think they selected? Yup, a D35. Not only that, but Wanner Engineering's standard pump design met or exceeded the Mil-SPECs required for this application. Just like our submarines, D35's run reliably and quietly! Our Distributors are located all over the world, please send us your inquiry for immediate follow-up by a sales representative or distributor near you. |
view pumps for a specific flow range/pressure range by choosing from the below:
| Pump Model | Maximum Flow | Maximum Pressure | Typical Applications | |
 | F20 Series | 1 GPM | 1500 PSI | Precise metering and injection |
 | D03 Series | 3 GPM | 1200 PSI | Precise metering and spraying |
 | D04 Series | 3 GPM | 2500 PSI | Hot water pressure washing, machine tool coolant |
 | D10 Series | 8 GPM | 1000 PSI | Metering, washing, transfer, our most versatile pump |
 | D12 Series | 8 GPM | 1000 PSI | Machine tool coolant, the "vertical version of the D10" |
 | D15/17 Series | 13 GPM | 2500 PSI | Machine tool coolant, inlet fogging, hot water pressure washing, descaling |
 | H25 Series | 20 GPM | 1000 PSI | Lime slurry, spray drying, wax and resin pumping, chemical transfer |
Highlights of common applications can be read by clicking phrases below:
 |  |  |  |
| Machine Tool Coolant | SOx & NOx Reduction Gas Cooling | Spray Drying | Food & Beverage Industry |
 |  |  |  |
| Vehicle Care Industry | Precision Metering | Pulp and Paper Industry | Chemical Manufacturing |
 |
T.P.S., Inc. Columbia NJ 07860 | ||
| Phone: 908.496.9020 | Fax: 908.496.8080 | inquiry@fluidproducts.com | |
| ? INQUIRIES - Quick-n-Easy to fill out forms to get the information you need fast. |