Model D15 Hydra-Cell™ Pumps ...

You Think You've Got Pressure?

The Wanner Engineering D15 Hydra-Cell™ Pumps harness the power of the D35 Pentaplex and couple it with the high discharge pressure of the D04, resulting in a pump that can continuously put out 13 GPM at pressures up to 2,500 PSI.  As with all other Hydra-Cell™ pump, D15's can run dry, tolerate a closed inlet and pump hot or cryogenic fluids.  The most popular applications for the D15 pump include inlet fogging and high pressure machine tool coolant, where machining fluid is forced through the tool for better performance.  View the Catalog Pages Here

These special high pressure pumps are used for metering, deep hole drilling, cleaning, deburring, machine tool coolant, fuel injector and spray nozzle testing, descaling and turbo compressor inlet fogging applications. 

The D15 is available in a vertical configuration that we refer to as the D17.  It offers all the functionality of the D15 but takes-up less floor space.  The D17 can easily replace a multistage vertical centrifugal pump in a machine shop and, with the right HP motor, provide up to three times the pressure.

View pumps for a specific flow range/pressure range by choosing from the below:

 Pump ModelMaximum FlowMaximum PressureTypical Applications
F20 Series1 GPM1500 PSIPrecise metering and injection
D03 Series3 GPM1200 PSIPrecise metering and spraying
D04 Series3 GPM2500 PSIHot water pressure washing, machine tool coolant
D10 Series8 GPM1000 PSIMetering, washing, transfer, our most versatile pump
D12 Series8 GPM1000 PSIMachine tool coolant, the "vertical version of the D10"
H25 Series20 GPM1000 PSILime slurry, spray drying, wax and resin pumping, chemical transfer
D35 Series35 GPM1200 PSIAbrasive slurry pumping, in-plant cleaning systems, vehicle washing, paper mill applications, gas cooling

Highlights of common applications can be read by clicking phrases below:

Machine Tool Coolant ApplicationsGas Cooling and Scrubbing ApplicationsSpray Drying ApplicationsFood Processing Applications
Machine Tool CoolantSOx & NOx Reduction
Gas Cooling		Spray DryingFood & Beverage Industry
Vehicle Washing ApplicationsPrecise Metering and Injection ApplicationsPulp and Paper Mill ApplicationsChemical Processing Applications
Vehicle Care IndustryPrecision MeteringPulp and Paper IndustryChemical Manufacturing

CLICK HERE to receive copies of Hydra-Cell Specifications Folder

 

T.P.S., Inc.  Columbia NJ 07860
Phone: 908.496.9020 Fax: 908.496.8080 inquiry@fluidproducts.com
? INQUIRIES - Quick-n-Easy to fill out forms to get the information you need fast.

©2001-2008 T.P.S., Inc. Legal Information