| Model D12 Hydra-Cell™ Pumps The Wanner Engineering D12 Hydra-Cell™ Pump is a powerful positive displacement pump capable of flow rates from 1 to 8 GPM at pressures up to 1,000 PSI. These pumps were specifically designed to replace vertical multistage centrifugal pumps installed on CNC machining centers. Vertical multistage centrifugal pumps have mechanical seals that are prone to wear and costly to replace. In addition the centrifugal action can contribute to foaming of water based machine tool coolants. Contrast that to the D12 pump which provides a non-shearing, smooth flow, capable of pressures much higher than a multistage centrifugal pump - in a more compact size and with more efficiency. |
To the left is a picture of a D12 installed on a small coolant reservoir which is fed by a little centrifugal pump. In many instances our pumps can be installed into or tapped into the machining centers' coolant reservoir.
Wanner Engineering supplies these pumps as just a pump or as a pump and motor package. We also provide you with the minimum coolant reservoir dimensions required if you are fabricating a reservoir. Most of the OEM's that manufacture higher pressure coolant delivery systems either standardize on Hydra-Cells™ pumps or offer it as an option. A basic high pressure coolant delivery system to deliver 5-6 GPM at 1,000 PSI, including filter housings, (http://www.fdpp.com) can be purchased for less than $3,000, not including a separate coolant reservoir, if required. Please contact us with your requirements.
View the Catalog Pages Here
View pumps for a specific flow range/pressure range by choosing from the below:
| | Pump Model | Maximum Flow | Maximum Pressure | Typical Applications |
 | F20 Series | 1 GPM | 1500 PSI | Precise metering and injection |
 | D03 Series | 3 GPM | 1200 PSI | Precise metering and spraying |
 | D04 Series | 3 GPM | 2500 PSI | Hot water pressure washing, machine tool coolant |
 | D10 Series | 8 GPM | 1000 PSI | Metering, washing, transfer, our most versatile pump |
 | D15/17 Series | 13 GPM | 2500 PSI | Machine tool coolant, inlet fogging, hot water pressure washing, descaling |
 | H25 Series | 20 GPM | 1000 PSI | Lime slurry, spray drying, wax and resin pumping, chemical transfer |
 | D35 Series | 35 GPM | 1200 PSI | Abrasive slurry pumping, in-plant cleaning systems, vehicle washing, paper mill applications, gas cooling |
Highlights of common applications can be read by clicking phrases below:
