D04 Hydra-Cell Pumps by Wanner Engineering for High Pressure Pumping Applications

D04 Hydra-Cell™ Pumps ...

The Wanner Engineering D04 Hydra-Cell™ Pump is very similar to the Model D03, except is is capable of nearly twice the pressure! This pump has the same steady state accuracy of ±1% with a repeatability and linearity to 3% or better as its' smaller counterparts the F20 and D03 series. They also have the same tolerance for running dry and pumping reclaimed fluids.

View the Catalog Pages Here

This special higher pressure version addresses some market segments that benefit from discharge pressure over 1,200 PSI such as grinding wheel unloading, turning centers, hot water pressure washing and small capacity hydraulic atomization systems. As compared to the D03 series pump the D04 has:

The crankshaft and connecting rods have larger lands and are harder and polished.
D04's have a cast housing, which includes more material and strength.
The diaphragm plate is machined from steel instead of aluminum.
The diaphragms have a retaining lip on the front and rear side to withstand higher pressures.
The manifold and valve plates are thicker for strength and their bolts are longer and heavier.
The oil reservoir is larger to to reduce air entrainment.

Hydra-Cell™ Pumps are sealless positive displacement pumps capable of higher pressures (up to 2500 psi). One of our best customers for these pumps is a manufacturer of pressure washing equipment used at construction sites and plants that have zero discharge policies. The water and chemicals used for washing are reclaimed, and since our pumps doesn't have cups, packing and mechanical seals, they are more reliable and perform better. Hydra-Cells also operate quieter and run smoother than pumps based on older technology. This particular OEM uses HOT Water in the 180F range. At these temperatures piston and plunger pumps are quickly damaged - Hydra-Cell's™ enable their customers to take advantage of the higher water temperatures available.

view pumps for a specific flow range/pressure range by choosing from the below:

Pump Model	Maximum Flow	Maximum Pressure	Typical Applications
F20 Series	1 GPM	1500 PSI	Precise metering and injection
D03 Series	3 GPM	1200 PSI	Precise metering and spraying
D10 Series	8 GPM	1000 PSI	Metering, washing, transfer, our most versatile pump
D12 Series	8 GPM	1000 PSI	Machine tool coolant, the "vertical version of the D10"
D15/17 Series	13 GPM	2500 PSI	Machine tool coolant, inlet fogging, hot water pressure washing, descaling
H25 Series	20 GPM	1000 PSI	Lime slurry, spray drying, wax and resin pumping, chemical transfer
D35 Series	35 GPM	1200 PSI	Abrasive slurry pumping, in-plant cleaning systems, vehicle washing, paper mill applications, gas cooling

Highlights of common applications can be read by clicking phrases below:


Machine Tool Coolant	SOx & NOx Reduction Gas Cooling	Spray Drying	Food & Beverage Industry

Vehicle Care Industry	Precision Metering	Pulp and Paper Industry	Chemical Manufacturing

	T.P.S., Inc. Columbia NJ 07860
	Phone: 908.496.9020	Fax: 908.496.8080	inquiry@fluidproducts.com

? INQUIRIES - Quick-n-Easy to fill out forms to get the information you need fast.